Zubehör
Spool Spinner
Together with the Pouch Winder, our spools can be used to roll the pouches directly from the packaging machine into a perfect roll. These rolls can be easily transported and placed onto the Pouch Inspector.
The Spool Spinner has an easy slide-in-system to capture the pouches. Due to the low-resistant spinning core the pouches are prevented from tearing.
Spool Spinners are available in two variations and different core colors. This ensures easy recognition in every phase.
- Variety of core colors (optional)
- Easy slide-in-system to capture the pouches
- Low-resistant spinning core to prevent tearing
Available as:
Spool Spinner – Round – 42 cm
Spool Spinner – Hexagon – 50 cm
-
- 42% more pouches (compared to our round spool)
- easily placed on the ground or in a rack

Pouch Winder
Rolls the filled pouch strips from the pouch packaging machine onto a spool without creating tension on the strips. This prevents torn strips.
The U-sensor of the Pouch Winder measures the tension and controls the winding speed. It is also possible to change the winding direction. In addition, the foot pedal can be used to manually wind the spool in either direction.
This Pouch Winder can also be used with any brand of packaging machine.
- rolls from packaging machine
- into a perfect roll on a spool
- easy to transport
- easy slide-in-system to grab the pouches
- easier to insert the pouches
- winding direction manually adjustable

Mini Keyboard
To optimize the validation process we’ve implemented the Mini Keyboard.
It’s a small keyboard with eight buttons. Buttons like ‘Ok’, ‘Back’, ‘Next’ and ‘Report’ will get you through the validation process even faster. It can be used at the Pouch Inspector or at your desk.
- optimizes the validation process
- can be used with the Pouch Inspector
- can be used from your work station

Pi Transport
If you don’t want the inspected pouches to be rolled onto a spool use Pi Transport. This device pulls the pouches through the system. The end result will be a large string of pouches in a box.
Pi Transport takes care of transporting the pouches through the Pouch Inspector and drops a string of pouches in a bin besides the table. No need to unwind a spool to find the pouch for repair.
- optimizes the handling process
- can be used with the Pouch Inspector
- easy to install

RFID System
Every crate will receive it’s own RFID tag (Radio Frequency Identification) and is registered in our Pi Web 3.0 software. This creates total traceability of every pouch.
In combination with our newest software Track&Trace, it’s a full process control from inspection to final inspected and approved pouch rolls.
- Contributes to an end-to-end chain control
- View the location of rolls, any time
- full controll

Mini Pi
With this repair station you can easily add photos of repaired pouches to the software system of the Pouch Inspector (Pi Web 3.0).
You can add as many extra photos as you like, for example photos of medication packages.
- Easy to use repair station
- Software module integrated in Pi Web 3.0 (inspection software of Pouch Inspector)

